AIRMT-85 Bånddiskant

Varenr.: [3540701] | Producent: Monacor | Model-nr.: AIRMT-85 | EAN: 4007754250251

På lager, bestil inden kl. 16.00 og vi sender i dag (hverdage + søndag) Mere info - Varen kan også hentes i vores butik i 4140-Borup

Lager kampagne

Der er 1 på lager

Den aktuelle pris gælder kun så længe lokalt lager haves

DKK 1.099,00
ex. moms 879,20
Total inkl. fragt 1.099,00
Læg i indkøbskurv
Air Motion Transformers
are a special type of tweeter systems which have been developed by the German physicist Oskar Heil during his research on the characteristics of the human ear. The main feature is a film-covered cone with a special folding which vibrates like an accordion when an audio signal is applied. This folding allows to accommodate a large cone area at a minimum of space. The AMTs feature a dynamic sound, an excellent transient response, a high efficiency and a low harmonic distortion.
High-end Air Motion Transformer tweeter, 20 W, 4 Ω
  • Tweeter based on the principle of Air Motion Transformer
  • High-performance neodymium magnet system
  • Fine, dynamic and brilliant reproduction of the high frequencies
  • Folded cone made of Kapton and aluminium
  • High efficiency
  • For use from 2,500 Hz on
  • Robust aluminium front panel

Klang+Ton 08,09/2016
“Compact AMT with quite a low crossover frequency possible for two-way speaker systems and multi-way speaker systems of highest quality.”
Impedance (Z)4 Ω
Transmission method-
Frequency range2,000-30,000 Hz
Resonant frequency (fs)-
Rec. crossov. frequ. (fmax.) (12 dB/oct.)> 2,500 Hz
Power rating (RMS)20 W
Peak music power output (MAX)40 W
Sensitivity92 dB/W/m
Max. rated SPL-
Max. voltage-
Radiation angle, horizontal-
Radiation angle, vertical-
Suspension compl. (Cms)-
Moving mass (Mms)-
Mech. Q factor (Qms)-
Electr. Q factor (Qes)-
Total Q factor (Qts)-
Equivalent volume (Vas)-
DC resistance (Re)3.8 Ω
Force factor (BxL)-
Voice coil induct. (Le)-
Voice coil diameter-
Voice coil former-
Linear excursion (XMAX)-
Eff. cone area (Sd)-
Magnet weight-
Magnet diameterneodymium rods
Mounting cutoutØ 66 mm
Mounting depth36 mm
Mounting hole diameterØ 75 mm
Hole spacing X-axis-
Hole spacing Y-axis-
Dimensions?85 mm x 36 mm
Outside diameterØ 85 mm
WidthØ 85 mm
Depth36 mm
Protective class-
Admiss. ambient temp.0-40 °C
Weight0.3 kg
Packing unit1
Type of speaker-